What is the process of pyrolysis oil extraction?
Pyrolysis oil extraction working process
1. Put raw materials into reactor by auto-feeder, then heat the reactor with any one of the following fuel materials: coal, wood, natural gas, oil. Do not stop heating the reactor, when the temperature reaches nearly 250 degree Celsius, waste tyre/plastic/rubber will be transferred to oil gas.
2. The liquid oil will be cooled by condenser from oil gas and then collected by oil tank. Third, the exhaust gas which can not be cooled in normal pressure will be recycled to heat the reactor. In this way, you can not only saving energy, but also protecting environment.
3. After you get oil, the temperature will be low, at this time, carbon black will be discharged automatically.
Last, when the temperature falls to 100 degree Celsius, worker could put steel wire hook to reactor to take steel wire out. After all these steps, you can start another batch.
Please feel free to leave your contacts here and your privacy is protected. A competitive quotation will be provided according to your detailed requirement within one business day.
contact us
Product
project case
-
Waste tire to diesel plant project installed in South Africa
-
8 sets of 15 ton plastic to oil pyrolysis machines installed in China
-
Waste tire pyrolysis machine and waste oil distillation machine were successfully installed in Japan
-
A set of 7TPD waste oil to diesel distillation machine was installed in Mali
-
8 sets of waste oil sludge pyrolysis machines put into operation in China
-
-
14 tons/day waste oil to diesel distillation plant installed in Indonesia