waste oil to diesel

Producing diesel oil through pyrolysis of tires?

tire oil to diesel
Pyrolysis tire oil to diesel plant

Waste tires contain big tires and small tires, by using DOING waste tire pyrolysis plant can turn waste tires into crude oil, oil rate for big tires is 45%-50%, for small tyres is 35%-40%. We also have pyrolysis tire oil to diesel plant, which can turn crude oil from pyrolysis plant to diesel, diesel rate for big tires is 40%-45%, and for small tires is 31%-36%

From 10 ton waste tires, big tires can get 4.5-5 ton crude oil or 4-4.5 ton diesel. While small tires can get 3.5-4 ton crude oil or 3-3.5 ton diesel. Please see the following form.

Raw materials

Crude oil rate

Diesel oil rate

Big tyres

45%-50%

40%-45%

Small tyres

35%-40%

31%-36%

 
Oil capacity from 10 ton waste tires:
Note:Crude oil and diesel can not get at the same time. Crude oil produced by waste tyre pyrolysis plant, diesel is the refining of crude oil produced pyrolysis tire oil to diesel plant.

oil distillaiton machine
Pyrolysis tire oil to diesel plant

Capacity

Raw materials

Crude oil(T)

Diesel(T)

10T

Big tyres

4.5-5T

4-4.5T

10T

Small tyres

3.5-4T

3-3.5T

 

Producing diesel oil through pyrolysis of tires?

oil distillation plant
Pyrolysis tire oil to diesel plant working processing

1.pump the waste oil into reactor by oil pump.
2.use coal/wood/natural gas/fuel oil/electricity heating the reactor.
3.after heating some time, the liquid oil will become oil gas, oil gas will be liquefied by the cooling pipe and condensers then will go into oil tank. Here we get mixed oil, or you can also call it fuel oil. If you wanna get diesel and gasoline separately, through temperature control could separate it and collected into two different oil tanks.
4.some gases (syngas) like Methane, Ethane, Propane, Butane, and Hydrogen cannot be liquefied under normal pressure and normal temperature will be recycled to fire furnace heating the reactor.
5.when use burning material heating the reactor, will produce some smoke. These smokes will go into our de-dusting system, the inside we design some high pressure nozzles, these nozzles will spraying some chemical water, the dust will be absorbed by the chemical water and flowing into the de-dusting pool. In the pool we will put some chemical which could remove the sulfur.
6.the exhaust gas will go into the chimney sucked by draft fan, when emission the exhaust gas will become steam, no pollution.


 


Leave Your Message

Name

Country

E-mail*

Tel/Whatsapp

Inquiry